Canco Industries Ltd.
Can Bolts - CCB [Delhi]Yellow passivated or sheradised to ensure corrosion resistance. Also available in stainless steel to resist extreme conditions. Eight different diameters to cover all the important base materials including structural concrete. ....
Can Projection Bolts - CPB [Delhi]Yellow passivated or sheradised to ensure corrosion resistance. Also available in stainless steel to resist extreme conditions. Eight different diameters to cover all the important base materials including structural concrete. ....
Can Thru Bolt - CTB [Delhi]Easy installation into the base material through the fixture and series installation. Used when marking out, hole spotting is difficult. Ensures time saving as result of smaller drill hole. It reduces the drilling effort as the hole diameter is not larger than the bolt diameter. Can be used in a tension zone. Shorter setting time and fewer reinforcement hits due to the possibility of reduc....
Can Safety Anchor - CS+ [Delhi]Quick and series installation. Used where strict tolerances have been specified. Maximum reliability: Even in cracked concrete zones and even at shallow embedment depth. Useful where safety and aesthetics both are required. Fixing through the fixture is possible. Fixing in the tensile zone of high strength and reinforced concrete. Torque induced setting action provides a pull-down acti....
Can Eye & Hook Bolt - CEB & CHB [Delhi]Yellow passivated or sheradised to ensure corrosion resistance. Supply complete with shield washer and hex nut. Suitable for permanent anchorage.....
Can Tam Anchor - CTM [Delhi]Ideal for overhead ceiling work or heavy items. Fixing barriers, roller shutter etc.....
Can Sleeve Anchor - CSA [Delhi]When the hole marking, spotting is difficult. Available in double sleeve & SS. Fully assembled. Unique sleeve design to provide pull down onto fixture. Fixing heavy objects securely on soft faced partition boards. Fixture can be removed and reused. Faster fixing. No special tools required. ....
Can Drop-In Anchor - CTS [Delhi]Available in Carbon steel & Stainless steel. Maximum expansion against the wall of the hole. Shell is forced outward in 4 directions compressing against the walls of the hole. Developed compression force is usually very high when compared to torque controlled anchors, hence low displacement. Larger bearing area. Fixes equipment that may be required to be removed or replaced. Bolts or s....
Can Hammer Driven Anchor - CZA [Delhi]Deformation controlled anchor with less displacement(Load displacement curve similar to adhesive type anchors). Easy installation. Through fixing and series installation. Yellow passivated or sheradised to ensure optimum protection against corrosion. Also available in stainless steel. ....
Can Hit Pin - CHP [Delhi]Offers greater holding power than nylon expanders. Large diameter head for greater pullover strength. Flush fitting expander nail head for foolproof fixing. Zinc alloy body for corrosion protection. Hardened steel expander nail. ....
Can Frame Fixing - CFF [Delhi]Through fixing installations. Spacing installations. Quick and easy fixing. ....
Can Brass Anchor - CBA [Delhi]Larger bearing area. Acts as a socket. Fixture can be removed and replaced. Suitable for solid brick, light concrete, hollow core concrete chambers and timber. Internal tapering to enable the anchor to expand and to self lock the suspension rod into position. The body in knurled for improved performance. ....
Plaster Board Screw - CSDF [Delhi]No drill required. Screw and fixture can be reused. Can be used in double thickness plasterboard, aerated concrete, gypsum and chipboard. Sharp plug point ensures a careful pre-drilling. ....
Canco Clamps (M-8+M-10 - CAA) [Delhi]One stock for both M-8 and M-10 connections. No loss of side screws.....
Canco Clamps (M-8+M-10 - CBB) [Delhi]One stock for both M-8 and M-10 connections No loss of side screws.....
Canco Clamps (M-8+M-10 - CCC) [Delhi]One stock for both M-8 and M-10 connections. No loss of side screws. ....
Clevis Hanger [Delhi]Designed with the on outside of lower U-strap so the yoke cannot slide toward the center of the bolt, thus bending of the is minimized. Spacer sleeve used for size 16" theu 36" Components : Top Yoke, Bottom Strap, and bolt or stud with nut assembled Hanger load nut above clevis must be tightened securely to assure proper hanger performance.....
Canco Clamps (CSA - 508) [Delhi]Manufacturer of Canco Clamps :M-8+M-10 - CAA, M-8+M-10 - CBB, M-8+M-10 - CCC, Clevis Hanger, CSA - 508, New clip. visit us for an update soon.....
New clip [Delhi]Manufacturer of Canco Clamps :M-8+M-10 - CAA, M-8+M-10 - CBB, M-8+M-10 - CCC, Clevis Hanger, CSA - 508, New clip. ....